Pin – Pin, Corrosion-Resistant, Handle/Body Style: Hex, Minimum Punch Dia: 1/16 in, Maximum Punch Dia: 1/4 in, 7 Punches | J48007

66 People watching this product now!

J48007 SET PUNCH PIN SUPER DUTY Includes: J2497 (7-1/4″W x 8-1/4″H 7-Pocket Vinyl Tool Kit), J48014 (1/4″ Tip 5-3/4″ Super-Duty Drive Pin Punch), J48018 (1/8″ Tip 4-3/4″ Super-Duty Drive Pin Punch), J48116 (1/16″ Tip 4-1/8″ Super-Duty Drive Pin Punch), J48316( 3/16″ Tip 5-1/4″ Super-Duty Drive Pin Punch), J48332 (3/32″ Tip 4-1/2″ Super-Duty Drive Pin Punch), J48532 (5/32″ Tip 5″ Super-Duty Drive Pin Punch), J48732 (7/32″ Tip 5-1/2″ Super-Duty Drive Pin Punch)

Pin – Pin, Corrosion-Resistant, Handle/Body Style: Hex, Minimum Punch Dia: 1/16 in, Maximum Punch Dia: 1/4 in, 7 Punches | J48007

-20 to 60 °C Standard Temperature, 10 to 90% Relative Humidity | FLUKE-971

-30 to 500 °C Standard Temperature | FLUKE-62

“tool backpack” – Polyester Body, Hard Molded Polypropylene Bottom Material, Number of Compartments: 48 | 55485

0 HSD to 100 HSD Hardness, Portable Electronic Hardness Tester Shore D, Accurate Up to 1% | 15-137-3

0 to 150mm Range, 0.01mm Resolution, Electronic Caliper;Stainless Steel with 40mm Stainless Steel Jaws, 0.001″ Accuracy, Micro USB Output, NIST Traceability Certificate | 69548287

0.0001 Squareness Per Inch, Hardened Steel, 1-2-3 Block with 23 Hole Setup Block 3/8 – 16 Inch Tapped Hole Size, 55-60 Rc Hardness, Sold As Matched Pair | 13-670-5

0.001″ Graduation, 0-50-0 Dial Reading, Indicator & Base Kit – 0.001 Inch Graduation, Includes Certificate of Calibration Traceable to NPL | U51-SPI

0″ to 8″ Range, 0.001″ Graduation, 0.1″ per Revolution, Dial Caliper;White Face, 1.97″ Jaw Length, Accurate to 0.0015″, NIST Traceability Certificate | 37530714

Pin – Pin, Corrosion-Resistant, Handle/Body Style: Hex, Minimum Punch Dia: 1/16 in, Maximum Punch Dia: 1/4 in, 7 Punches | J48007

Related products