SGS Square End Mill – 1 Series, Carbide Material, Uncoated Finish/Coating, Single End, 3/32 in Mill Diameter, 4 Flutes, 9/32 in Length of Cut | 30111

Original price was: $20.10.Current price is: $10.99.

80 People watching this product now!

Description

Description

30111 01.0938 Micrograin solid carbide 30° right hand spiral Right hand cutting Center cutting

Abrasives
Cutting Tools
Electrical
Pneumatics
Safety

SGS Square End Mill – 1 Series, Carbide Material, Uncoated Finish/Coating, Single End, 3/32 in Mill Diameter, 4 Flutes, 9/32 in Length of Cut | 30111

0.03″, 3/8″ LOC, 1/8″ Shank Diam, 2-1/2″ OAL, 3 Flute, Solid Carbide Square End Mill Single End, AlTiN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series Miniature | 62778170

0.5000 in Mill Diameter, 4 Flutes, 2.0000 in Length of Cut | 33111

1″ Diam 4 Flute Single End Solid Carbide 0.06″ Corner Radius End Mill, AlTiN, 6″ OAL, 2″ LOC, 1″ Shank Diam, 37° Helix, RH Cut, RH Flute, Centercutting | 73747149

1″ Diam, 2-1/4″ LOC, 2 Flute High Speed Steel Ball End Mill Uncoated, Single End, 4-9/16″ OAL, 3/4″ Shank Diam, Spiral Flute | 01760644

1″, 1-1/2″ LOC, 3/4″ Shank Diam, 3-3/4″ OAL, 2 Flute, High Speed Steel Square End Mill Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute | 01710664

DNMG432 IMR Grade IG125T Carbide Turning Insert – TiN/Al2O3/TiCN Finish, 55° Diamond, 1/2″ Inscr Circle, 3/16″ Thick, 1/32″ Corner Radius | 93614360

DNMG432 P Grade TCN55 Carbide Turning Insert – TiN Finish, 55° Diamond, 1/2″ Inscr Circle, 3/16″ Thick, 1/32″ Corner Radius | 07182686

Double End, 3 mm Mill Diameter, 4 Flutes, 6 mm Length of Cut | 48888

SGS Square End Mill – 1 Series, Carbide Material, Uncoated Finish/Coating, Single End, 3/32 in Mill Diameter, 4 Flutes, 9/32 in Length of Cut | 30111

Related products