SGS Square End Mill – 3 Series, Carbide Material, Uncoated Finish/Coating, Single End, 1/4 in Mill Diameter, 2 Flutes, 3/4 in Length of Cut | 30331

Original price was: $31.41.Current price is: $10.99.

65 People watching this product now!

Description

Description

30331 03.250 Micrograin solid carbide 30° right hand spiral Right hand cutting Center cutting

Abrasives
Cutting Tools
Electrical
Pneumatics
Safety

SGS Square End Mill – 3 Series, Carbide Material, Uncoated Finish/Coating, Single End, 1/4 in Mill Diameter, 2 Flutes, 3/4 in Length of Cut | 30331

#36, #29, #25, #21, #7 Drill, F to U Drill, #6-32 to 1/2-13 Tap, Spiral Point Tap and Drill Set Bright Finish High Speed Steel Drills, Bright Finish High Speed Steel Taps, Plug Chamfer, 18 Piece Set | 59337543

0 to 1/2″ Capacity, Integral Shank Drill Chuck;Keyless, Straight Shank | 73547937

0.09″, 0.27″ LOC, 1/8″ Shank Diam, 1-1/2″ OAL, 2 Flute, Solid Carbide Square End Mill Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series Miniature | 37289816

0.1875 in Mill Diameter, 4 Flutes, 0.4375 in Length of Cut | 36408

0.2500 in Mill Diameter, 4 Flutes, 1.5000 in Length of Cut | 33123

1″ Diam 4 Flute Single End Solid Carbide 0.06″ Corner Radius End Mill, AlTiN, 6″ OAL, 2″ LOC, 1″ Shank Diam, 37° Helix, RH Cut, RH Flute, Centercutting | 73747149

1″, 1-1/2″ LOC, 3/4″ Shank Diam, 3-3/4″ OAL, 2 Flute, Cobalt Square End Mill Single End, Uncoated, Spiral Flute, Centercutting, Right Hand Cut, Right Hand Flute | 01880632

1″, 1-1/2″ LOC, 3/4″ Shank Diam, 3-3/4″ OAL, 2 Flute, High Speed Steel Square End Mill Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute | 01710664

SGS Square End Mill – 3 Series, Carbide Material, Uncoated Finish/Coating, Single End, 1/4 in Mill Diameter, 2 Flutes, 3/4 in Length of Cut | 30331

Related products