SHOCKWAVE RED HELIX Milwaukee_48_89_4631_1.jpg – 9/64 in Smallest Drill Bit Size, 1/16 in Largest Drill Bit Size, 23 Pieces | 48-89-4631

Original price was: $72.62.Current price is: $21.99.

45 People watching this product now!

Description

Description

48-89-4631 23PC SHOCKWAVE DRILL BIT SET Titanium Coating for Up to 3X Life vs. Black Oxide SHOCKWAVE Impact Duty, Engineered for Drills and Impacts RED HELIX Design for Rapid Chip Removal CHIP BREAKER Decreased Heat Buildup 135° split point for precision start no walking

Abrasives
Cutting Tools
Electrical
Pneumatics
Safety

SHOCKWAVE RED HELIX Milwaukee_48_89_4631_1.jpg – 9/64 in Smallest Drill Bit Size, 1/16 in Largest Drill Bit Size, 23 Pieces | 48-89-4631

0.03″, 3/8″ LOC, 1/8″ Shank Diam, 2-1/2″ OAL, 3 Flute, Solid Carbide Square End Mill Single End, AlTiN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series Miniature | 62778170

0.2500 in Mill Diameter, 4 Flutes, 1.5000 in Length of Cut | 33123

1″, 1-1/2″ LOC, 3/4″ Shank Diam, 3-3/4″ OAL, 2 Flute, High Speed Steel Square End Mill Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute | 01710664

DNMG431 Grade TCN55 Carbide Turning Insert – TiN Finish, 55° Diamond, 1/2″ Inscr Circle, 3/16″ Thick, 1/64″ Corner Radius | 07182306

DNMG432 Grade TCN55 Carbide Turning Insert – TiN Finish, 55° Diamond, 1/2″ Inscr Circle, 3/16″ Thick, 1/32″ Corner Radius | 07182314

DNMG432 IMR Grade IG125T Carbide Turning Insert – TiN/Al2O3/TiCN Finish, 55° Diamond, 1/2″ Inscr Circle, 3/16″ Thick, 1/32″ Corner Radius | 93614360

DNMG432 P Grade TCN55 Carbide Turning Insert – TiN Finish, 55° Diamond, 1/2″ Inscr Circle, 3/16″ Thick, 1/32″ Corner Radius | 07182686

Double End, 0.0937 in Mill Diameter, 4 Flutes, 0.1875 in Length of Cut | 31174

SHOCKWAVE RED HELIX Milwaukee_48_89_4631_1.jpg – 9/64 in Smallest Drill Bit Size, 1/16 in Largest Drill Bit Size, 23 Pieces | 48-89-4631

Related products