Ball Insert Bearing – Cylindrical Bore, 1-3/4 in ID | 1112

Original price was: $245.77.Current price is: $73.99.

55 People watching this product now!

Description

Description

1112 KRRB BRG Designed for extremely dirty or wet conditions Feature R-Seals with flared lips that firmly contact the ground OD of the inner ring R-Seals provides a positive seal against dirt and other contaminants while effetely retaining the lubricant Equipped with Shroud-Seals, providing extra effectiveness and protection Extra-wide design provides additional shaft support and extra-large grease capacity KRR Series have a spherical OD

Abrasives
Cutting Tools
Electrical
Pneumatics
Safety

Ball Insert Bearing – Cylindrical Bore, 1-3/4 in ID | 1112

PHS – Pilloballs – Rod End Insert Type w/ Female Left Hand Thread: M6x1, Bore Diameter: 6 mm

PHS – Pilloballs – Rod End Insert Type w/ Female Thread: M20x1.5, Bore Diameter: 20 mm | PHS-20

Pillow Block Ball Bearing Unit – 0.6250 in Bore, 2-Bolt Base Mount, Eccentric Collar Locking, Non-Expansion Bearing (Fixed), Cast Iron Housing Material, Medium Duty | P2BL

Pillow Block Ball Bearing Unit – 1.0000 in Bore, 2-Bolt Base Mount, Eccentric Collar Locking, Non-Expansion Bearing (Fixed), Cast Iron Housing Material, Medium Duty | P2BL

Pillow Block Ball Bearing Unit – 1.0000 in Bore, 2-Bolt Base Mount, Eccentric Collar Locking, Non-Expansion Bearing (Fixed), Cast Iron Housing Material, Standard Duty | P2BL

Pillow Block Ball Bearing Unit – 1.1250 in Bore, 2-Bolt Base Mount, Set Screw Locking, Non-Expansion Bearing (Fixed), Cast Iron Housing Material, Standard Duty | P2B

Pillow Block Ball Bearing Unit – 1.1875 in Bore, 2-Bolt Base Mount, Set Screw Locking, Non-Expansion Bearing (Fixed), Cast Iron Housing Material, Standard Duty | P2B

Pillow Block Ball Bearing Unit – 1.2500 in Bore, 2-Bolt Base Mount, Eccentric Collar Locking, Non-Expansion Bearing (Fixed), Cast Iron Housing Material, Standard Duty | P2B

Ball Insert Bearing – Cylindrical Bore, 1-3/4 in ID | 1112

Related products