MORSE Cutting Tools Square End Mill – 4640C Series, Cobalt Material, TiCN Finish/Coating, Single End, 0.5000 in Mill Diameter, 4 Flutes, 1.2500 in Length of Cut | 45306

Original price was: $105.13.Current price is: $31.99.

41 People watching this product now!

Description

Description

45306 4640C ROUGH/FINISHER 1/2

Abrasives
Cutting Tools
Electrical
Pneumatics
Safety

MORSE Cutting Tools Square End Mill – 4640C Series, Cobalt Material, TiCN Finish/Coating, Single End, 0.5000 in Mill Diameter, 4 Flutes, 1.2500 in Length of Cut | 45306

0.05″, 0.075″ LOC, 1/8″ Shank Diam, 2-1/2″ OAL, 3 Flute, Solid Carbide Square End Mill Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Series Miniature | 58746652

0.08″, 0.24″ LOC, 3/16″ Shank Diam, 1-1/2″ OAL, 2 Flute, High Speed Steel Square End Mill Single End, Uncoated, Centercutting | 71768899

0.09″, 0.27″ LOC, 1/8″ Shank Diam, 1-1/2″ OAL, 2 Flute, Solid Carbide Square End Mill Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series Miniature | 37289816

0.1250 in, High Speed Steel Material, 1.6250 in Flute, 118 ° Point Angle | C22679

0.1875 in Mill Diameter, 4 Flutes, 0.4375 in Length of Cut | 36408

1″, 1-1/2″ LOC, 3/4″ Shank Diam, 3-3/4″ OAL, 2 Flute, Cobalt Square End Mill Single End, Uncoated, Spiral Flute, Centercutting, Right Hand Cut, Right Hand Flute | 01880632

DNGA434 T00825 Grade HT601CA Ceramic Turning Insert – Uncoated, 55° Diamond, 1/2″ Inscr Circle, 3/16″ Thick, 1/16″ Corner Radius | 07576556

DNMG432 Grade TCN55 Carbide Turning Insert – TiN Finish, 55° Diamond, 1/2″ Inscr Circle, 3/16″ Thick, 1/32″ Corner Radius | 07182314

MORSE Cutting Tools Square End Mill – 4640C Series, Cobalt Material, TiCN Finish/Coating, Single End, 0.5000 in Mill Diameter, 4 Flutes, 1.2500 in Length of Cut | 45306

Related products