MORSE Cutting Tools Square End Mill – 4640C Series, Cobalt Material, TiCN Finish/Coating, Single End, 0.6250 in Mill Diameter, 4 Flutes, 2.5000 in Length of Cut | 45314

Original price was: $134.46.Current price is: $40.99.

72 People watching this product now!

Description

Description

45314 4640C ROUGH/FINISHER 5/8

Abrasives
Cutting Tools
Electrical
Pneumatics
Safety

MORSE Cutting Tools Square End Mill – 4640C Series, Cobalt Material, TiCN Finish/Coating, Single End, 0.6250 in Mill Diameter, 4 Flutes, 2.5000 in Length of Cut | 45314

0 to 1/2″ Capacity, Integral Shank Drill Chuck;Keyless, Straight Shank | 73547937

1″ Diam 4 Flute Single End Solid Carbide 0.06″ Corner Radius End Mill, AlTiN, 6″ OAL, 2″ LOC, 1″ Shank Diam, 37° Helix, RH Cut, RH Flute, Centercutting | 73747149

1″, 1-1/2″ LOC, 1/2″ Shank Diam, 3-1/2″ OAL, 2 Flute, High Speed Steel Square End Mill Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute | 01710649

1″, 1-1/2″ LOC, 3/4″ Shank Diam, 3-3/4″ OAL, 2 Flute, High Speed Steel Square End Mill Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute | 01710664

DNGA434 T00825 Grade HT601CA Ceramic Turning Insert – Uncoated, 55° Diamond, 1/2″ Inscr Circle, 3/16″ Thick, 1/16″ Corner Radius | 07576556

DNMG431 P Grade TCN55 Carbide Turning Insert – TiN Finish, 55° Diamond, 1/2″ Inscr Circle, 3/16″ Thick, 1/64″ Corner Radius | 07182660

DNMG432 IMR Grade IG125T Carbide Turning Insert – TiN/Al2O3/TiCN Finish, 55° Diamond, 1/2″ Inscr Circle, 3/16″ Thick, 1/32″ Corner Radius | 93614360

Double End, 0.0937 in Mill Diameter, 4 Flutes, 0.1875 in Length of Cut | 31174

MORSE Cutting Tools Square End Mill – 4640C Series, Cobalt Material, TiCN Finish/Coating, Single End, 0.6250 in Mill Diameter, 4 Flutes, 2.5000 in Length of Cut | 45314

Related products