MORSE Cutting Tools Square End Mill – 5943T Series, Carbide Material, ALTiN Finish/Coating, Single End, 3/4 in Mill Diameter, 4 Flutes, 1-1/2 in Length of Cut | 90808

Original price was: $176.63.Current price is: $52.99.

39 People watching this product now!

Description

Description

90808 5943T CBD EM 4F 3/4 TIALN

Abrasives
Cutting Tools
Electrical
Pneumatics
Safety

MORSE Cutting Tools Square End Mill – 5943T Series, Carbide Material, ALTiN Finish/Coating, Single End, 3/4 in Mill Diameter, 4 Flutes, 1-1/2 in Length of Cut | 90808

0.09″, 0.27″ LOC, 1/8″ Shank Diam, 1-1/2″ OAL, 2 Flute, Solid Carbide Square End Mill Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series Miniature | 37289816

0.1250 in Mill Diameter, 4 Flutes, 0.3750 in Length of Cut | 36404

0.1250 in, High Speed Steel Material, 1.6250 in Flute, 118 ° Point Angle | C22679

0.2500 in Mill Diameter, 4 Flutes, 1.5000 in Length of Cut | 33123

0.5000 in Mill Diameter, 4 Flutes, 2.0000 in Length of Cut | 33111

DNGA434 T00825 Grade HT601CA Ceramic Turning Insert – Uncoated, 55° Diamond, 1/2″ Inscr Circle, 3/16″ Thick, 1/16″ Corner Radius | 07576556

DNMG432 IMR Grade IG125T Carbide Turning Insert – TiN/Al2O3/TiCN Finish, 55° Diamond, 1/2″ Inscr Circle, 3/16″ Thick, 1/32″ Corner Radius | 93614360

DNMG432 P Grade TCN55 Carbide Turning Insert – TiN Finish, 55° Diamond, 1/2″ Inscr Circle, 3/16″ Thick, 1/32″ Corner Radius | 07182686

MORSE Cutting Tools Square End Mill – 5943T Series, Carbide Material, ALTiN Finish/Coating, Single End, 3/4 in Mill Diameter, 4 Flutes, 1-1/2 in Length of Cut | 90808

Related products